Foam Pourer
Product Model :
FOAM EQUIPMENT
FOAM TOP POURER
Foam pourers designed and manufactured by Imen Tiar Engineering Company are intended to be used in foam systems for the protection of flammable liquid storage tanks and they combine foam generation, vapour sealing and foam pouring into one robust, low-maintenance integral unit.
Imen Tiar Engineering Co. issues many basic body sizes of foam pourers with capacities ranging from 75 to 3300 Lit/min at inlet pressure between 3 and 10 barg. The system designer is therefore able to make the most cost-effective use of available water and foam concentrate resource. This system is designed to disperse the finished foam against the tank wall. This ensures a more rapid spread across the surface of the fuel, whilst lowering the application speed to reduce contamination of the foam by the fuel; an important consideration especially on polar solvent fuels. Inspection, routine maintenance and replacement of the frangible glass disc are facilitated by an easily removable cover, on top of the unit. Removal of this hatch also allows the system to be tested without discharging foam into tank.
With a suitable foam concentrate, the top pourer sets can be used in applications involving either hydro carbon or water miscible fuels. The properties of the finished foam will be dependent upon the concentrate used.